华佳表面科技-凯发k8娱乐

ie powder coatingpdf download

  • product description:
    product description:

    ie series of powder coatings are mainly made of weather-resistant polyester resin without tgic, which are suitable for coating of metal substrates in general industrial fields.

    film appearance & package

    appearance effects: smooth surface (all kinds of gloss range), sanding, hammer effect

    color:           according to requirement

    packing:         20kgs.carton boxes with double pe-bag.

    for more information, please contact us.

    physical data

    specific gravity:1.2-1.7(depending on the gloss and color)

    dry flow ability: 120-160

    particle size:   100%<160μm,according to requirement

    substrate & preparation

    substrate: aluminum profile, steel or galvanized steel sheet and other metal substrates. (for more information, please contact us).

    preparation: the substrate shall be pre-treated according to gb/t9271 or iso 1514. the cold-rolled steel plate tested for salt spray resistance shall be phosphate in addition to gb/t 9217. if the product is applied in high-anticorrosive environment of c4 or above (rated according to iso12944), it can be used with huajia anticorrosive special primer (please consult us).

    curing condition (object temperature)

    -> can be used such as ir, gas, hot convection drying path, oven and other ways of curing.

    -> if use the gas oven to bake, combustion by-products will change the color of the film.

    recommended curing condition: object temperature/time       180-200℃/10-15min

    application

    do not mix this product with others

    the substrate must be properly pre-treated before use

    manual or automatic electrostatic spraying can be used

    the film thickness should be determined according to the geometry and requirement of the coated object, and the performance should be evaluated when the film thickness is less than 60μm

    product performance & film properties

    properties

    test method

    criteria

    film thickness

    iso 2360

    60-80um

    adhesion

    iso 2409

    class 0

    hardness

    iso 15184

    ≥f

    cupping test

    iso 1520

    ≥5mm

    bend test

    iso 1519

    ≤3mm

    salt spray

    iso 9227

    pass at 500 hours - no corrosion area more than 2mm from scribe

    impact test

    iso 6272

    ≥2.5nm

    gb/t 1732

    50cm*kg

    humidity

    iso 6270

    pass at 500 hours – no blistering, creep≤2mm

    accelerated weathering test

    iso 11341

    500h q-sun test, ≥ 70 % gloss retention , △e≤5

    note: 1-all chemical and physical properties are laboratory test results (unless otherwise stated), and are for reference only in application. the performance still needs to depend on the final use environment of the product.

    2-the substrate for the above chemical and physical tests is chromate aluminum plates, and all test plates are sprayed with a film thickness of 60 to 80 μm .

    storage stability

    store in a cool (≤35℃)、dry warehouse, prevent direct sunlight, and should be isolated from fire source, away from heat source. storage life is 12 months from the date of production. for products with gloss less than 70%, storage life is 6 months@30℃. for   special products, please refer to specific product description.

    safety precaution

    all dusts are respiratory irritants. therefore, inhalation of the dust or of the vapour resulting from the cure should be avoided. take step to prevent skin contact, but should contact occur, wash skin with soap and water. in case of eye contact flush immediately with clean water and seek medical advice. dust and powder should not be allowed to build up on surface or ledge. dust clouds of any finely divided organic material can be ignited with an electric spark or open flame. all equipment should be electrically earthed to prevent build up of static.

网站地图